OFFICIAL NOTICE CONTENT
Opportunity description
**W912EE** Amendment Two- The purpose of this amendment is to update the Scope of Work to include color of metal building. Scope of work says "paint of industrial enamel on color 'tan' with 'brown' trin & gutters. Please see attached Scope of Work. Amendment One - The purpose of this amendment is to update the Scope of Work details and change the set aside type to unrestricted. The request for quotes date is changed to November 6, 2026, at 3PM Central Time. Please see updated Scope of Work and Amendment. Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation This is a solicitation for commercial items prepared in accordance with the format in RFO Part 12, as supplemented with additional information included in this notice. Solicitation Number W912EE27QA002 is being issued as a request for quote (RFQ) with the intent to issue one Firm-Fixed Price Contract. This solicitation is being issued under 100% small business set aside. The NAICS code for this procurement is 332311, Prefabricated Metal Building and Component Manufacturing, with a size standard of 750 employees. This procurement is being conducted in accordance with regulations at RFO Part 12 - Acquisition of Commercial Products and Commercial Services. The U.S. Army Corps of Engineers, Arkabutla lake Project, has a requirement to procure one metal building to cover and protect the new well. Arkabutla Lake Project has previously had a new well installed and now requires the old well to be abandoned and the surrounding small 30 x 50 building to be rehabbed to continue to protect the new well. The USACE personnel will perform prep work prior to deliver and install by removing the old building where replacement pre-fabricated building will be delivered and installed. Please see below for details. General Specification: Abandon old well Install new plumbing includes valves to meet AWWA C-509 specs, flange fitting to meet AWWA specs, watts 2� pressure reducer, 2� flange master meter, Stenner model 45MHP10 chemical pump, 3 phase air compressor, accessories and fittings to connect and create a working system Purchase, deliver, & install one (1) 30�x50� pre-fabricated metal Red Iron open span building with 12� tall eaves, 26-gauge roof & walls, one (1) roll up door, one (1) 3�x7� walk through door, insulation, and gutters. Building will include engineer�s stamped drawings for the building and a set of anchor bolt plans. Sand blast and paint tank with one (1) coat Tnemec-Zinc 3-5ml inside and out. Second coat inside Tnemec series 21 6-9ml. Third coat inside Tnemec series 216-9ml. Second coat outside L140 epoxy 6-9ml. Third coat outside 1094 urethane 5-7ml. Install new electrical including 200-amp enclosed circuit breaker outside (2020 NEC requirement), 200-amp main breaker panel inside, pump control panel with motor starter to control well, disconnect at well, six (6) 8� long LED strip lights, two (2) 55 watt outside lights with photocell, ten (10) 120V outlets including an outside GFCI, 3 phase circuit for air compressor, and reconnect existing pressure controls on tank The contractor shall provide all supervision, labor, tools, equipment, and tools necessary for purchase and installation no later than 120 days after award. Additional information about the specifications for this equipment is listed in the scope of work. All Offerors shall submit a quote with content as specified herein. Quotes submitted without the specified content may be determined unsuccessful and removed from further consideration. Offers are encouraged to review all clauses that are incorporated into this solicitation. ****SPECIAL ATTENTION SHOULD BE FOCUSED ON RFO 52.212-2 EVALUATION � COMMERCIAL PRODUCTS, AS THIS CLAUSE OUTLINES THE EVALUATION FACTORS AND BASIS FOR AWARD FOR THIS REQUIREMENT. **** The government intends to make one award for one firm fixed price contract. Offers for less than the required delivery will not be accepted. The Government intends to award without discussions while reserving the right to hold discussions if determined advantageous to the Government. Offerors are encouraged to provide their best proposed pricing in their initial offer. Notes to Offerors: A BIDDING SCHEDULE MUST BE SENT IN WITH YOUR QUOTE. Quotes shall be submitted electronically via email, to: afton.riles@usace.army.mil. For questions and technical inquiries please see instructions below. You are responsible for reading all information contained in this solicitation and all attachments if any posted with it. Offerors should check the SAM.gov web site often for modifications to this solicitation. Offerors are responsible for ensuring their quotes arrive timely. TECHNICAL INQUIRIES AND QUESTIONS Technical inquiries and questions relating to this solicitation are to be submitted via Bidder Inquiry in ProjNet at (https://www.projnet.org). Offerors are encouraged to submit questions early in the advertisement process, in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Any questions submitted within the 72 hours window of the solicitation closing date are not guaranteed a response will be provided. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. The Solicitation Number is: W912EE27QA002, Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation The Bidder/Offeror Inquiry Key is: MX684V-PQ8W9T Specific Instructions for ProjNet Bid Inquiry Access: From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. Identify the Agency. This should be marked as USACE. Key. Enter the Bidder Inquiry Key listed above. Email. Enter the email address you would like to use for communication. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Bidders/Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.
FEDERAL BUYER
Buyer and contracting office
Public points of contact
DOCUMENTS & LINKS
Opportunity documents
That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.
GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.
NOTICE TIMELINE
GovBidFit change history
This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.
GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.
GOVBIDFIT SCREENING LENS
What deserves attention before you spend bid time
These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.
This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.
The stored deadline is within three days. Check earlier question, site-visit and attachment requirements immediately; the final response date may not be the first deadline that matters.
No Set aside used is recorded as the set-aside or restriction. Confirm the bidding entity actually satisfies the applicable program and size requirements before investing proposal time.
NAICS 332311 · PSC 5410 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.
GovBidFit stores 3 notices tied to this solicitation. Review the notice chain and official SAM.gov history because later postings can change dates, scope or instructions.
GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.
The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.
Questions to resolve next
What this opportunity record tells you
SAM.gov identifies this as a combined synopsis/solicitation from DEPT OF DEFENSE. The record was posted on November 2, 2026 and currently lists November 6, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.
The listed product or service classification is NAICS 332311 · Prefabricated Metal Building and Component Manufacturing · PSC 5410. The set-aside field is No Set aside used. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.
Before deciding to bid
GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.
Open the official SAM.gov notice →