GovBidFit database · SAM.gov sourceData refreshed November 4, 2026Official description stored

Combined Synopsis/Solicitation

Cleaning, Inspection, and Hazardous Waste Removal for Two 10,000-Gallon Oil/Water Separators

Solicitation FA663327QA001 · Due 2026-11-12. Cleaning, Inspection, and Hazardous Waste Removal for Two…. DEPT OF DEFENSE in Minnesota · NAICS 541990.

SolicitationFA663327QA001
Notice typeCombined Synopsis/Solicitation
PostedOctober 29, 2026
Response deadlineNovember 12, 2026
Place of performanceMinneapolis, Minnesota, 55450, USA
ClassificationNAICS 541990 · All Other Professional, Scientific, and Technical Services · PSC H391
Set-asideSmall Business Set Aside - Total

OFFICIAL NOTICE CONTENT

Opportunity description

Stored from SAM.gov public data

RV2 - update clause DFARS 252.204-7021 RV4 - Vendor Questions Request for Quote (RFQ)- Solicitation - RV1 Contracting Office Address: 934th Airlift Wing/Contracting Office 860 Military Highway Minneapolis, MN 55450-2100 This is an RFQ for commercial products or commercial services prepared in accordance with RFO Part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a Request for Quotation (RFQ) for Waste Removal, Cleaning, and Inspection of Oil-Water Separators, solicitation number FA6633-27-Q-A001. This solicitation document and incorporated provisions and clauses are those in effect through the RFO Federal Acquisition Circular (FAC) 2026-01 and Defense Federal Acquisition Supplement (DFARS) change notice 05/07/2026. This requirement is being solicited as a 100% Total Small Business Set-aside. The NAICS Code is 541990, size standard: $19.5 million. All contractors must be registered in the System for Award Management (SAM) (http://www.sam.gov) database to be eligible to receive award and have completed the �On-line Representations and Certifications� within that registration. The Offeror must be an authorized, qualified, and certified vendor. Written quotes are required (oral offers will not be accepted). One award is anticipated. All quotes are due by 12:00 PM Central Standard Time 12 Nov 2026. All questions and quotes must be directed to the 934AW Contracting Officer and the Contracting Specialist via email Mikkael.Hahn.1@us.af.mil; jessica.ferris.5@us.af.mil Questions asked within 2 days of solicitation close will be answered at the discretion of the Contracting Officer. Emailed quotes are preferred. Late quotes may be rejected at the Contracting Officer�s discretion. This acquisition is a Total Small Business Set-aside IAW RFO 19.104. Award will be made based on Best value using price, technical approach and past performance. �Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available. Quotes must be good through 30 December 2026.� Contract Line items: The contractor shall provide all labor, equipment, materials, delivery and all other items necessary to provide the following item(s): Contract Line Item 0001 Qty 2 Unit of Measure Each Unit Price Description Pump, clean, and inspect 10,000-gallon underground Oil-Water Separators (OWS) Contract Line Item 0002 Qty 1 Unit of Measure LO Unit Price Description Non-Hazardous waste disposal Contract Line Item 0003 (Optional) Qty 1 Unit of Measure LO Unit Price Description Hazardous waste disposal OPTIONAL Site Visit Information: An optional site visit will be held on Thursday Nov 5th, 2026 at 09:00 a.m. at the 934th Airlift Wing. Please contact Mikkael Hahn and Jessica Ferris and specifics will be shared. Mikkael.Hahn.1@us.af.mil;jessica.ferris.5@us.af.mil All Site Visit attendees need prior clearance via an Entry Access List (EAL) Ask for and Complete the EAL with security information � full name, date of birth, driver�s license number and state issued. Send completed EAL to jessica.ferris.5@us.af.mil for processing. All site visit information must be provided via an EAL request form by: 2 November 2026 at 15:00 p.m. NOTE: All Contractors/Subs are required to have proper identification to access an Air Force Installation. REAL ID is in force. Any individual without REAL ID is required to have additional forms of identification such as a passport or birth certificate. There are no exceptions. See Attached: Attch 1 PWS Attch 2 Wage Determination 2025-4945 RV 33 Attch 3 CLS Provisions & Clauses Attch 4 OWS 1 - Bldg 602 Attch 5 OWS 2 - Bldg 606 PROVISIONS AND CLAUSES: Familiarity with applicable provisions and clauses is the responsibility of the firm, or individual. All RFO Provisions and Clauses may be viewed in full text at the Federal Acquisition Regulation Table of Contents via the Internet at https://www.acquisition.gov/. The attached Provisions and Clauses (Attachment 3-CLS Provisions & Clauses) apply to this solicitation and are incorporated by reference. TERMS: AFRC Ombudsman (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Col Ginger Ormond, AFRC/DS, 555 Robins Parkway, Suite 250C, Robins AFB GA 31098. Comm: 478-327-1008. Email: ginger.ormond.2@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer. ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) (a) Contractors shall not: (1) Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or (2) Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order. (b) For the purposes of Department of the Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086) are Class I ODSs: (1) Halons: 1011, 1202, 1211, 1301, and 2402. (2) Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R-500, R-501, R-502, and R-503; and (3) Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide. [NOTE: Material that uses one or more of these Class I ODSs as minor constituents do not meet the Department of the Air Force definition of a Class I ODS.] Health and Safety on Government Installations (a) In performing work under this contract on a Government installation, the contractor shall: (1) Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractor and Government personnel performing or in any way coming in contact with the performance of this contract; and (2) Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes. (b) The contracting officer may, by written order, direct Air Force Occupational Safety and Health (AFOSH) Standards and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract. (c) Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract. CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (a) The contractor shall obtain base identification, and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Department of the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished contractor identification badges while visiting or performing work on the installation. (b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, (Security Forces Pass & ID, Bldg. 906), the authorized contractor individual(s) should provide a valid driver�s license, current vehicle registration, and valid vehicle insurance certificate to obtain a vehicle pass. 1. All persons requesting access must provide a REAL ID Act compliant credential (AFMAN 31-113, paragraph 3.1.) 2. All persons and their property are subject to inspection, IAW Internal Security Act of 1950 (50 U.S.C. 797, Sec.21) and the Code of Federal Regulation Title 32 Sec 809a.2. 3. Contractors are not authorized escort authority. (AFMAN 31-113, paragraph 6.5.2.) The Organization requesting the project will provide escorts. 4. Dangerous weapons or destructive devices are not allowed. Firearm permits and conceal/carry permits are not exempt. (IDP, Annex C, Appendix 1, Tab L, paragraph 4.9.) The majority of this installation is federal exclusive jurisdiction which overrides state, county or local weapons permits. 5. Driving a vehicle on military installations is a privilege granted by the installation commander (AFI 31-218 Chap 2). All operators must be able to produce, on request, proof of insurance and a valid driver's license. produce, on request, proof of insurance and a valid driver's license to obtain a vehicle pass. (c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site. (d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Integrated Defense, and DODMAN5200.02_AFMAN16-1405 Air Force Personnel Security Program citing the appropriate paragraphs as applicable. (e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office. (f) The contractor shall provide an after-hours contact number or after-hours email in the Emergency Mass Notification System (EMNS) for each of their personnel, whose normal place of duty is on a DoD installation or within a DoD facility. The contractor shall comply with any additional requirements in DAFMAN 10-206 for emergency operational reporting. Foreign Nationals may participate and may remove themselves from the Emergency Mass Notification System at any time. To update information, personnel can access the globe icon on their system desktop screens and choose the �Access Self-Service� option. (g) Failure to comply with these requirements may result in withholding of final payment.

FEDERAL BUYER

Buyer and contracting office

View buyer page →
Department / agencyDEPT OF DEFENSE
Sub-tierDEPT OF THE AIR FORCE
Contracting officeFA6633 934 AW PK
Office addressMINNEAPOLIS, MN, 55450-2100, USA

Public points of contact

DOCUMENTS & LINKS

Opportunity documents

Verify on official source
Attachment URLs are not included in the SAM.gov bulk record for this notice.

That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.

View documents on SAM.gov ↗

GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.

NOTICE TIMELINE

GovBidFit change history

1 stored event

This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.

First seen by GovBidFitOctober 30, 2026

GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.

GOVBIDFIT SCREENING LENS

What deserves attention before you spend bid time

Decision support

These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.

Active solicitation stage

This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.

Near-term deadline

The stored deadline is within ten days. Build an internal submission deadline and verify whether questions, site visits, registrations or approvals are due earlier.

Eligibility gate recorded

Small Business Set Aside - Total is recorded as the set-aside or restriction. Confirm the bidding entity actually satisfies the applicable program and size requirements before investing proposal time.

Classification signal

NAICS 541990 · PSC H391 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.

Notice history exists

GovBidFit stores 5 notices tied to this solicitation. Review the notice chain and official SAM.gov history because later postings can change dates, scope or instructions.

Official description stored

GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.

Public buyer contact available

The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.

Questions to resolve next

Has SAM.gov posted an amendment or changed the response date, attachments or submission instructions since this GovBidFit snapshot was refreshed?Are there question deadlines, site visits, registrations or internal approvals that occur before the final response date?Does the bidding entity hold the required current status for the recorded set-aside and the solicitation's assigned NAICS size standard?Can the business perform in Minnesota at a sustainable cost after travel, mobilization, staffing, licensing and subcontractor requirements are considered?Which related notice or amendment currently controls the response instructions?

What this opportunity record tells you

SAM.gov identifies this as a combined synopsis/solicitation from DEPT OF DEFENSE. The record was posted on October 29, 2026 and currently lists November 12, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.

The listed product or service classification is NAICS 541990 · All Other Professional, Scientific, and Technical Services · PSC H391. The set-aside field is Small Business Set Aside - Total. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.

Before deciding to bid

Read the complete official description and scope. Verify the exact response date, time and time zone on SAM.gov. Confirm NAICS/PSC and every set-aside eligibility requirement. Review attachments, amendments, Q&A and submission instructions. Check place of performance, staffing, insurance, bonding and execution requirements.
Source and trust

GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.

Open the official SAM.gov notice →