OFFICIAL NOTICE CONTENT
Opportunity description
Notice of Intent The Centers for Disease Control and Prevention intends to award a sole source firm fixed price purchase order to TSI Incorporated 500 Cardigan Road Shoreview, MN 55126 (CAGE Code: 24575) for the purchase of repair and calibration services for Government owned equipment. Only the manufacturer (TSI Inc.) can repair and calibrate the Aerodynamic Particle Sizer because proprietary models must be adjusted for the calibration, proprietary knowledge of internal flow regulators is needed for the repair, and unique access to instrument components that are located behind embedded electronics is required. Alternative service providers are not available because proprietary information on the instrument operating model and flow regulation system is required. Description TCI shall repair and calibrate 3 Aerodynamic Particle Sizers with an expected turnaround of 21 days. Upon receipt of instruments, TSI Inc. shall bring the 3 Aerodynamic Particle Sizers to a calibration flow rate of 5 liters per minute (lpm) (1 lpm for sample + 4 lpm for sheath) and maintain the calibration flow rate, even with a pressure drop of up to 50 inH20 at the inlet by adjusting microprocessor controlled volumetric flow control, barometric pressure correction, and separate pumps for sheath and total flows, to enable the Aerodynamic Particle Sizers to operate under a wide range of conditions and still maintain calibration. TSI Inc. shall also calibrate the 3 Aerodynamic Particle sizers for precise and accurate numbersize distributions for 0.37 to 20 micrometers aerodynamic diameter using a time-of-flight technique, and a patented, double-crest optical system to detect the occurrence of particle coincidence (when more than one particle is in the detection area) and to identify poor signals near the instrument�s lower detection threshold. The Government will provide the following components for repair and calibration: 1. Aerodynamic Particle Sizer-S/N 1169 2. Aerodynamic Particle Sizer-S/N 1203 3. Aerodynamic Particle Sizer-S/N 72321006
FEDERAL BUYER
Buyer and contracting office
Public points of contact
GOVBIDFIT SCREENING LENS
What deserves attention before you spend bid time
These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.
This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.
The stored deadline is within three days. Check earlier question, site-visit and attachment requirements immediately; the final response date may not be the first deadline that matters.
No Set aside used is recorded as the set-aside or restriction. Confirm the bidding entity actually satisfies the applicable program and size requirements before investing proposal time.
NAICS 811210 · PSC J066 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.
GovBidFit stores 2 notices tied to this solicitation. Review the notice chain and official SAM.gov history because later postings can change dates, scope or instructions.
GovBidFit has stored substantive notice text for this record, but attachments, clauses, amendments and Q&A can still contain requirements that are not visible in the description alone.
The source data includes 1 public contracting contact. Use the solicitation's stated communication rules and deadlines before contacting the buyer.
Questions to resolve next
What this opportunity record tells you
SAM.gov identifies this as a solicitation from HEALTH AND HUMAN SERVICES, DEPARTMENT OF. The record was posted on September 17, 2026 and currently lists September 21, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.
The listed product or service classification is NAICS 811210 · PSC J066. The set-aside field is No Set aside used. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.
Before deciding to bid
GovBidFit is independent and is not a U.S. government website. GovBidFit stores a structured mirror of SAM.gov public opportunity data in its own database and keeps the compact snapshot as a fallback. The official SAM.gov notice remains the controlling source. The official SAM.gov notice controls if anything here differs from the source or a later amendment.
Open the official SAM.gov notice →