FT RILEY - ZERO TURN MOWER - TRADE IN REQ

SolicitationW911S227U0102

BuyerDEPT OF DEFENSE

Notice typeCombined Synopsis/Solicitation

PostedOctober 30, 2026

Response deadlineNovember 10, 2026

Place of performanceFORT RILEY, KANSAS, New York, 66442

ClassificationNAICS 333112 · Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing · PSC 3750

Set-asideSmall Business Set Aside - Total

OFFICIAL NOTICE CONTENT

Opportunity description

Stored from SAM.gov public data

2026 or Newer John Deere Z997 Zero-Turn Mower with The Specs noted in the Specs portion below - Additionally, MUST take and offer value for 5 pieces of mowing equipment all operating and in good standing (Husqvarna Z254, 2 TW96 Rhino Mower Decks, TW26 Rhino Deck, and John Deere MX7 Mower Deck) REQUIRED SPECS ARE AS FOLLOWED: : -Deck Size: 72 inch Deck. -Front Tires: Flat Free Tires -Rear Tires: Caster Wheels -Engine: Min 1,600 cc 3-cylinder liquid-cooled diesel, Tier 4 Final complaint, Minimum 37.0 gross HP, B20biodiesel compatible.-Deck Actuation: Full Hydraulic Deck Lift System powered by tractor hydraulic pump and controlled via operator hand lever. -Display: Digital multi- functioning -Electrical System: 75 Amps -PTO Clutch System: Wet-Disk Hydraulic Clutch

FEDERAL BUYER

Buyer and contracting office

View buyer page →

Department / agencyDEPT OF DEFENSE

Sub-tierDEPT OF THE ARMY

Contracting officeW6QM MICC-FT DRUM

Office addressFORT DRUM, NY, 13602-5220, USA

Public points of contact

PrimaryJevon Schroederjevon.k.schroeder2.civ@army.mil 520-945-4524

DOCUMENTS & LINKS

Opportunity documents

Verify on official source

Attachment URLs are not included in the SAM.gov bulk record for this notice.

That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.

View documents on SAM.gov ↗

GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.

NOTICE TIMELINE

GovBidFit change history

1 stored event

This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.

First seen by GovBidFitOctober 31, 2026

GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.

GOVBIDFIT SCREENING LENS

What deserves attention before you spend bid time

Decision support

These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.

Active solicitation stage

This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.

Near-term deadline

The stored deadline is within ten days. Build an internal submission deadline and verify whether questions, site visits, registrations or approvals are due earlier.

Eligibility gate recorded

Small Business Set Aside - Total is recorded as the set-aside or restriction. Confirm the bidding entity actually satisfies the applicable program and size requirements before investing proposal time.

Classification signal

NAICS 333112 · PSC 3750 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.

Official description stored

GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.

Public buyer contact available

The source data includes 1 public contracting contact. Use the solicitation's stated communication rules and deadlines before contacting the buyer.

Questions to resolve next

Has SAM.gov posted an amendment or changed the response date, attachments or submission instructions since this GovBidFit snapshot was refreshed?Are there question deadlines, site visits, registrations or internal approvals that occur before the final response date?Does the bidding entity hold the required current status for the recorded set-aside and the solicitation's assigned NAICS size standard?Can the business perform in New York at a sustainable cost after travel, mobilization, staffing, licensing and subcontractor requirements are considered?

What this opportunity record tells you

SAM.gov identifies this as a combined synopsis/solicitation from DEPT OF DEFENSE. The record was posted on October 30, 2026 and currently lists November 10, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.

The listed product or service classification is NAICS 333112 · Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing · PSC 3750. The set-aside field is Small Business Set Aside - Total. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.

Before deciding to bid

Read the complete official description and scope. Verify the exact response date, time and time zone on SAM.gov. Confirm NAICS/PSC and every set-aside eligibility requirement. Review attachments, amendments, Q&A and submission instructions. Check place of performance, staffing, insurance, bonding and execution requirements.

Source and trust

GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.

Open the official SAM.gov notice →