GovBidFit database · SAM.gov sourceData refreshed September 20, 2026Official description stored

Combined Synopsis/Solicitation

INL Bogota 9mm Training Ammunition

Federal Combined Synopsis/Solicitation from STATE, DEPARTMENT OF for District of Columbia. Review the official description, buyer contacts, NAICS/PSC,…

Solicitation191NLE26Q0131
Notice typeCombined Synopsis/Solicitation
PostedSeptember 10, 2026
Response deadlineSeptember 22, 2026
Place of performanceDistrict of Columbia, COL
ClassificationNAICS 332994 · PSC 1305
Set-asideService-Disabled Veteran-Owned Small Business (SDVOSB) Sole Source (FAR 19.14)

OFFICIAL NOTICE CONTENT

Opportunity description

Stored from SAM.gov public data

Solicitation Notice: 191NLE26Q0131 - INL Bogota 9mm Training Ammunition (PCS: 1305- Ammunition, through 30mm ; NAICS: 332993- Ammunition Manufacturing ) 100 % Service Disable Veteran Owned Small Business Set Aside (SDVOSB) Background: INL Bogota�s training for operational readiness program (TOR) supports the Colombian National Police Education Directorate and other critical units. TOR will provide training ammunition to the Colombian National Police, required to enhance the firearms skills of tactical units responsible for combating transnational criminal organizations and narcotics trafficking. The following information is requested in this RFI/Sources Sought: 1. Company name, point of contact, phone number, and address; 2. UEI Number and CAGE Code; 3. Interest in nature of participation [e.g., prime contractor, teaming partner, primary subcontractor]; 4. SDVOSB SBA certification for applicable NAICS (SAM Certificate); 5. Technical specifications in sufficient detail to confirm equivalency 6. Pricing must include unit cost and total with all applicable burden applied; 7. MUST SPECIFY DELIVERY TIME. If unable to deliver 4 partial deliveries within 360-days, please specify reasonable delivery times Interested contractors may provide the above information via e-mail to the addresses listed below. Information submitted must be in sufficient detail as to allow for a thorough government review of the offerors proposed ammunition in order to determine it meets all technical specifications and equivalency. Proposal/quotes are due no later than Tuesday, September 22, 2026, at 5:00 PM EST. Questions pertaining to this solicitation shall be accepted until 5:00 PM EST on Monday, September 14, 2026. ALL QUOTES MUST BE VALID FOR 90-DAYS Primary Point of Contact: Michele Coccovizzo Senior Contract Support Specialist CoccovizzoML@state.gov Secondary Point of Contact: Jamillah Timmons Contracting Officer TimmonsJ@state.gov Technical Specifications: New product only. Ammunition must be in original packaging. Requested ammunition must be covered by manufacturer�s warranty and procured via a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channel upon request. Seller must have proper registration to be able to offer product. Responses must include sufficient detail to determine proposed items meet or exceed the technical requirements. Line 1 - 9mm 124 GR FMJ M882 DODIC A363 Mil Packing or equal. Qty � 1,500,000. Delivery (Shipping and Handling Instructions): The ammunition will be delivered directly to INL Freight Forwarder located in Miami, Florida � USA. The vendor is responsible for the preparation of delivery of all items listed above. Vendor will coordinate with COR for delivery/collection at vendor location. Delivery shall be made FOB Origin as soon as possible but not later than three hundred and sixty (360) days from the date of contract award and in accordance with the instructions from the COR, post award. The Contractor will conduct four (4) partial deliveries, given the schedule and quantity below as an example: 90 days ARO: 375,000 rounds 180 days ARO: 375,000 rounds 270 days ARO: 375,000 rounds 330 days ARO: 375,000 rounds FOB Origin shall be coordinated via INL freight forwarder. All Delivery will be coordinated with INL COR and provide requested information. Partial shipments of complete items are authorized and in coordination with the Contracting Officer or the Contracting Officer�s Representative (COR). The Contractor shall properly pack and consolidate the entire shipment to prevent damage, loss and/or misdirection. Upon notification, the contractor shall replace any items lost or damaged during shipment. The items acquired through this contract will be donated to the government of Colombia. In addition to ensuring that all items are prepared for safe shipment, the contractor shall include all the necessary export approvals, required material data safety sheets, licenses, and paperwork. One copy of the packing list and commercial invoice must accompany the shipment, attached to the outside of the �lead� or number one box/carton/package, or individually attached to the outside of each box/carton/package. The packing list shall include, at a minimum: description, brand name, serial number (if any), and quantities. Warranty: To facilitate expeditious return of warranty items and to avoid delays in the warranty process, the offeror shall provide within 30 days of notification of a warranty action the required information to facilitate shipping of warranty items to manufacturer. This includes, but is not limited to, information to ensure full compliance with ITAR regulations and no delay in providing the Reference RA# and a shipping address. Customs Clearance and Tax Exemptions: If applicable, the U.S. Government will assist the Contractor in obtaining customs clearance in Colombia and tax exemption certificates from the Government of Ukraine in accordance with the packing, marking, and submission of documents as instructed herein. Export License: The Contractor shall comply with Sections 38-40 of the Arms Export Control Act (AECA) (22 U.S.C. 2778-2780) and the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130) as required, for the prosecution of work under this contract at no additional cost to the Government. Failure to be in compliance with AECA and ITAR by date planned for commencement of contract performance as well as during the entire performance of work under this contract may result in contract termination. Any penalties rendered to the Contractor, as a direct result of being found non-compliance with AECA and ITAR will be the responsibility of the Contractor. The contractor is responsible for producing all required paperwork and obtaining all required Export Licenses. For additional information on AECA and ITAR, see http://www.pmddtc.state.gov/. Inspection And Acceptance: The equipment shall be received from vendor warehouse in United States where it will be consolidated for shipping / pick up by INL freight forwarder. The packing list of all equipment shall include at a minimum: description, brand name, serial number (if any), weight, and quantities. Partial Deliveries of completed contract line-item numbers (CLINs) will be accepted. A factory / warehouse visit may be conducted by INL COR and/or delegated representatives to evaluate quality assurance, quality control, shipping control, physical inspection of randomly selected finished items prior to shipping. PLEASE SEE ATTACHED STATEMENT OF WORK FOR ADDITIONAL INFORMATION AND EVALUATION FACTORS.

FEDERAL BUYER

Buyer and contracting office

View buyer page →
Department / agencySTATE, DEPARTMENT OF
Sub-tierSTATE, DEPARTMENT OF
Contracting officeACQUISITIONS - INL
Office addressWASHINGTON, DC, 20520, USA

Public points of contact

PrimaryMichele CoccovizzococcovizzoML@state.gov
SecondaryJamillah Timmonstimmonsj@state.gov

GOVBIDFIT SCREENING LENS

What deserves attention before you spend bid time

Decision support

These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.

Active solicitation stage

This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.

Very short response window

The stored deadline is within three days. Check earlier question, site-visit and attachment requirements immediately; the final response date may not be the first deadline that matters.

Eligibility gate recorded

Service-Disabled Veteran-Owned Small Business (SDVOSB) Sole Source (FAR 19.14) is recorded as the set-aside or restriction. Confirm the bidding entity actually satisfies the applicable program and size requirements before investing proposal time.

Classification signal

NAICS 332994 · PSC 1305 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.

Notice history exists

GovBidFit stores 2 notices tied to this solicitation. Review the notice chain and official SAM.gov history because later postings can change dates, scope or instructions.

Official description available

GovBidFit has stored substantive notice text for this record, but attachments, clauses, amendments and Q&A can still contain requirements that are not visible in the description alone.

Public buyer contact available

The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.

Questions to resolve next

Has SAM.gov posted an amendment or changed the response date, attachments or submission instructions since this GovBidFit snapshot was refreshed?Are there question deadlines, site visits, registrations or internal approvals that occur before the final response date?Does the bidding entity hold the required current status for the recorded set-aside and the solicitation's assigned NAICS size standard?Can the business perform in District of Columbia at a sustainable cost after travel, mobilization, staffing, licensing and subcontractor requirements are considered?Which related notice or amendment currently controls the response instructions?

What this opportunity record tells you

SAM.gov identifies this as a combined synopsis/solicitation from STATE, DEPARTMENT OF. The record was posted on September 10, 2026 and currently lists September 22, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.

The listed product or service classification is NAICS 332994 · PSC 1305. The set-aside field is Service-Disabled Veteran-Owned Small Business (SDVOSB) Sole Source (FAR 19.14). These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.

Before deciding to bid

Read the complete official description and scope. Verify the exact response date, time and time zone on SAM.gov. Confirm NAICS/PSC and every set-aside eligibility requirement. Review attachments, amendments, Q&A and submission instructions. Check place of performance, staffing, insurance, bonding and execution requirements.
Source and trust

GovBidFit is independent and is not a U.S. government website. GovBidFit stores a structured mirror of SAM.gov public opportunity data in its own database and keeps the compact snapshot as a fallback. The official SAM.gov notice remains the controlling source. The official SAM.gov notice controls if anything here differs from the source or a later amendment.

Open the official SAM.gov notice →