OFFICIAL NOTICE CONTENT
Opportunity description
This is a request for information (RFI) / SOURCES SOUGHT SYNOPSIS. This request is not a solicitation (Request for Proposal or Request for Quotations) or a promise to issue a solicitation in the future. Responses to this notice are not considered offers and cannot be accepted by the government to form a binding contract. The purpose of this request for information is in support of market research being conducted by the Air Force Metrology Calibration Program (AFMETCAL) to identify potential sources and gather information on current capabilities within the market. This synopsis is for planning purposes only and is NOT to be construed as a commitment by the Government nor will the Government pay for information solicited hereunder. All costs associated with responding to this RFI will be solely at the responding party's expense. The level of security clearance and amount of foreign participation in this requirement has not been determined. All information received in response to this RFI that is marked PROPRIETARY will be handled accordingly. Proprietary information will be safeguarded in accordance with the applicable Government regulations. Proprietary information or trade secrets should be clearly identified. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company's capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc.) Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. Currently there are no funds available for this acquisition. The Air Force Metrology and Calibration (AFMETCAL) program office has a requirement to procure a highly accurate, standardized, metrology-grade oscilloscope to establish a consistent technical baseline across all Precision Measurement Equipment Laboratories (PMELs) and the AFMETCAL engineering laboratory. Historically, PMELs have independently procured various oscilloscopes categorized as Test, Measurement, and Diagnostic Equipment (TMDE). This decentralized approach created significant inventory fragmentation, complicates Technical Order (TO) authoring/maintenance, and introduces training and bench setup inconsistencies across Air Force facilities. Standardizing hardware across all PMEL field units will ensure seamless technical alignment, simplify operator calibration training, streamline automated calibration routines, and guarantee identical bench setups across the enterprise. The Air Force is considering the purchase of 131 units to replace aging TMDE across active duty, guard, Foreign Military Sales (FMS) and PMEL locations. The Air Force is interested in any features that can shorten TACAN/IFF (pulse trains) measurements as well as integrated real-time measurement accuracy/uncertainty displayed during measurement. Although these are not part of the existing purchase description, they may be evaluated as part of a best value acquisition format. Interested vendors should submit a brief capability statement including company information (DUNS, CAGE, business size), relevant experience, and rough order of magnitude pricing. The NAICS code assigned to this acquisition is 334515 with a size standard of 750 employees. The total estimated quantity is 131 units over 4 years. Reconditioned, remanufactured, or used material is not acceptable for this item. Offerors responding to this sources sought market research notice must: (1) state whether you are a small or large business, if you are the manufacturer or provide the name of the manufacturer and size info of product you would be offering and the socioeconomic status and indicate small disadvantaged or woman-owned business, veteran owned, service disabled veteran owned, 8(a) historically black college or university or minority institution (HBCU/MI), or a historically underutilized business zone (HUBZone) (2) provide sales history including recent sales to commercial companies (3) advise if your product is a commercial item or if it will be modified; if not commercial at this time, will you be offering this item to the general public in the future. (4) advise if you have the item on a GSA schedule or other Government contract include front page of schedule and the page showing the part is on award (5) provide information concerning the technical capabilities of the product you are interested in offering, including commercial literature/brochures and warranty. Describe any awards you have been involved in that are the same as or similar to what is described in this RFI. Include any other pertinent information which would enable the government to assess your firm�s capabilities (6) advise if you accept the Government purchase card (7) Provide Point of Contact including: company/ institute name, address, phone number and email address (8) provide assigned Commercial and Government Entity (CAGE) Code (9) Verify if your company/institute is listed in the System for Award Management (SAM) (10) State if your company is domestically or foreign owned (if foreign owned, please indicate the country of ownership) (11) Advise how much time you would need to submit a technical proposal if a solicitation is issued (12) provide an estimated price for one each, an estimated price for the total quantity and provide any price quantity discounts based on the total estimated quantity (13) include estimated delivery time for shipment. Ensure only .pdf, .doc or .xls documents are attached to your email. Submit all responses to the listed point of contact. If an email response is not possible, submit by FAX to 937-713-5841 or mail to 813 Irving-wick Dr W., Horton Building, Heath OH 43056-1199. Reference 26E-187A-RF in all correspondence. Responses are due by 12/3/2026 at 2:00pm ET or 1400 hours; however, early responses are encouraged. Point of Contact � Megan Moretti Contract Specialist, Phone 937-713-5845 Email:megan.moretti@us.af.mil. Point of Contact - Frank Capuano, Contract Specialist, Phone 937-713-5842 Email:frank.capuano@us.af.mil.
FEDERAL BUYER
Buyer and contracting office
Public points of contact
DOCUMENTS & LINKS
Opportunity documents
That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.
GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.
NOTICE TIMELINE
GovBidFit change history
This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.
GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.
GOVBIDFIT SCREENING LENS
What deserves attention before you spend bid time
These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.
This notice appears to be market research rather than a conventional bid invitation. A capability response, technical feedback or evidence of market interest may matter more than a price proposal at this stage.
The stored response date leaves more than ten days, but amendments and pre-response milestones can shorten the usable preparation window.
The current feed does not show a program-specific set-aside restriction. That does not remove other eligibility, responsibility, registration or solicitation-specific requirements.
NAICS 334515 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.
GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.
The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.
Questions to resolve next
What this opportunity record tells you
SAM.gov identifies this as a sources sought from DEPT OF DEFENSE. The record was posted on November 3, 2026 and currently lists December 3, 2027 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.
The listed product or service classification is NAICS 334515 · Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals. The set-aside field is Unrestricted. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.
Before deciding to bid
GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.
Open the official SAM.gov notice →