OFFICIAL NOTICE CONTENT
Opportunity description
Purchase Description (PD) Position Turner for Large Hulls Surface Support Division, B343 Shop Red River Army Depot (RRAD) Texarkana, TX 75507-5000 11 August 2026 1.0 Scope. This PD is to define the specifications necessary to award a contract for a 1 EA Position(Posi)-Turner: Model numbers � 10LS-250 or equal to, will be for the Directorate for Maintenance in the Welding Shop section, Bldg. 343 in support of the Bradley/MLRS fleet expansion effort. Contractor shall perform any/all site preparation needed for new equipment. Site preparation may include delivery of new equipment, offloading and positioning of new equipment, planning and designing, fabrication, and commissioning necessary to furnish one Posi-Turner to the Welding Shop. 2.0 Requirements. The following salient characteristics are the minimum requirements for any proposed items being offered: Capacity: 10,000 lbs. - Unit includes the "Leveler" that adjusts the center-of-gravity under the hook to balance the load with pushbutton control - Bail adjusts 6" +/- either side of center (bail = 4.3" x 7.5") - Maximum sling spacing: 251" - Minimum sling spacing: 14.25" - Heavy duty non-slip surface on drum - Heavy duty drive package - Power required: 460/3/60 (power to be supplied from crane) - Includes operator pendant with 20'-0 cord. - System to be used with a single crane/hoist hook - Estimated unit weight: 4765 lbs. - Estimated system height: 49" (base to hook) - Painted standard Caldwell yellow - Meets ASME B30.20, BTH-1 design standards; design category "B", service class "2". 3.0 Installation Schedule. The Posi-Turner shall be delivered, installed and operational at building 343, Red River Army Depot. RRAD works a four-day, ten-hour workweek, Mon-Thurs, 0630-1700. Working Friday is not guaranteed but will be taken into consideration. The contractor may request to work Friday with 48 hours prior notice to RRAD POC. RRAD will be closed on all Federal Holidays which are: New Year�s Day Martin Luther King Birthday President�s Day Memorial Day Juneteenth Independence Day Labor Day Columbus Day Veteran�s Day Thanksgiving Day Christmas Day 4.0 Final Acceptance Testing A final acceptance run-off shall be performed. The runoff shall demonstrate the system�s ability to lift, roll over, and position 2 EA MLRS Hulls without failure. The test shall consist of the designed by RRAD personnel with no failures. Government will furnish the MLRS Hulls for the final acceptance testing 5.0 Technical Manuals Technical Manuals and Parts List: Contractor shall provide two (2) hard copies and one electronic copy on CD/DVD of operations sequence, system program, Bill of Materials (BOM), wiring diagrams/schematics, maintenance manuals for contractor installed equipment including calibration information and procedures where applicable. all operator and maintenance manuals. RESPONSIBILITIES Government Contractor () (XX) a. Furnish labor and material handling equipment for off-loading and placing items on foundation. () (XX) b. Set and level the machine components on its foundation. () (XX) c. Provide and install anchor bolts and nuts. () (XX) d. Connect machine to the provided utilities hook-up. () (XX) e. Provide all necessary materials, tools, gages and instrumentation necessary to perform the required tests. Material and tooling required for the performance testing at Government facility. () (XX) f. Provide and charge all systems with fluids in accordance with manufacturer's instructions. (XX) () g. Provide unobstructed utilities hook-up within 20 feet of system.
FEDERAL BUYER
Buyer and contracting office
Public points of contact
GOVBIDFIT SCREENING LENS
What deserves attention before you spend bid time
These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.
This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.
The stored deadline is within ten days. Build an internal submission deadline and verify whether questions, site visits, registrations or approvals are due earlier.
Small Business Set Aside - Total is recorded as the set-aside or restriction. Confirm the bidding entity actually satisfies the applicable program and size requirements before investing proposal time.
NAICS 333998 · PSC 4910 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.
GovBidFit stores 2 notices tied to this solicitation. Review the notice chain and official SAM.gov history because later postings can change dates, scope or instructions.
GovBidFit has stored substantive notice text for this record, but attachments, clauses, amendments and Q&A can still contain requirements that are not visible in the description alone.
The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.
Questions to resolve next
What this opportunity record tells you
SAM.gov identifies this as a combined synopsis/solicitation from DEPT OF DEFENSE. The record was posted on September 10, 2026 and currently lists September 28, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.
The listed product or service classification is NAICS 333998 · PSC 4910. The set-aside field is Small Business Set Aside - Total. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.
Before deciding to bid
GovBidFit is independent and is not a U.S. government website. GovBidFit stores a structured mirror of SAM.gov public opportunity data in its own database and keeps the compact snapshot as a fallback. The official SAM.gov notice remains the controlling source. The official SAM.gov notice controls if anything here differs from the source or a later amendment.
Open the official SAM.gov notice →