OFFICIAL NOTICE CONTENT
Opportunity description
Title: Sources Sought / RFI: T-38 Central Fuselage Station (CFS) 505 Drill Fixture Assemblies Notice Type: Sources Sought / Request for Information (RFI) Product Service Code (PSC): 3455 - Cutting Tools for Machine Tools (Alternative: 1560 - Airframe Structural Components) NAICS Code: 333514 - Special Die and Tool, Die Set, Jig, and Fixture Manufacturing (Socio-economic Size Standard: 500 Employees) Location: 309th Aircraft Maintenance Group (AMXG) / 575th AMXS, Randolph AFB, TX 78150 1. Disclaimer & Important Notes This is a Request for Information (RFI) / Sources Sought notice only. This notice is issued solely for information, planning, and market research purposes in accordance with FAR 15.201(e). It does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or an invitation for bid. The Government does not intend to award a contract on the basis of this RFI or to otherwise pay for the information solicited. Respondents are advised that the U.S. Government will not be responsible for any costs incurred in preparing or submitting a response to this notice. All submissions will become Government property and will not be returned. Security & Technical Drawing Access Notice: To maintain operational security, no engineering drawings, CAD models, or technical data packages will be uploaded or publicly released during this initial market research phase. The technical sourcing parameters in Section 2 provide sufficient industrial detail for facilities to assess their capabilities. During the subsequent formal solicitation phase, the complete, certified Technical Data Package (TDP)�including all JCG230321 engineering drawings and 3D CAD SolidWorks/STEP/IGES models�will be fully provided under secure DLA Joint Certification Program (JCP) verification to all qualified bidders. 2. Technical Sourcing Profile The Department of the Air Force, 309th Aircraft Maintenance Group (AMXG), 575th AMXS, Randolph AFB, TX, is conducting market research to identify potential sources capable of manufacturing, fabricating, and delivering: Item Description: T-38 CFS 505 Drill Fixtures Kit (Precision drill fixture plate, custom-molded transport case, and corresponding accessories) Design Specification: Fabricated to Drawing Configuration JCG230321 Quantity: Five (5) Configuration Sets Required Lead Time: Three (3) Months / 90 Calendar Days from contract award (Critical Path) FOB Point: FOB Destination (851 4th St West Bldg 241, Randolph AFB, TX 78150) Salient Technical & Manufacturing Parameters: Envelope Dimensions: Approximately 14" Length x 10" Width x 6" Height (to be stored in a custom three-layer foam insert within a Pelican Model 1400 Protector Case). Material Requirements: High-strength tool steels (e.g., A2, D2, or pre-hardened 4140 alloys) requiring precision heat-treatment, stress-relieving, and black oxide or equivalent corrosion-resistant coating. Machining Operations: Substantive multi-axis CNC vertical milling, wire EDM (Electrical Discharge Machining), and precision surface grinding to hold dimensional tolerances down to $\pm$ 0.001 inches on critical interface bores. Packaging, Cushioning, and 3-Layer Kitting: The Pelican Model 1400 case must be configured with three (3) distinct, stacked, and nested layers of precision CNC-cut or water-jet cut, closed-cell polyethylene foam (no pick-and-pluck allowed): Layer 1 (Top Layer): Custom-cut pockets contoured for A and D Holes on the fuselage and boattail sides. Layer 2 (Middle Layer): Custom-cut pockets contoured for B Holes on the fuselage and boattail sides. Layer 3 (Bottom Layer): Custom-cut pockets contoured for C Holes on the fuselage and boattail sides. Each layer shall feature high-contrast lettering identifying components and center finger pulls/tabs for easy lifting. 3. Critical Sourcing & Quality Parameters Buy American & Specialty Metals: This requirement is subject to the Buy American statute (41 U.S.C. Chapter 83) as implemented by FAR Part 25 and DFARS Part 225. In accordance with DFARS 252.225-7009, any specialty metals (including tool steels) used to fabricate the drill fixtures must be melted or produced within the United States or a qualifying allied country. First Article Inspection (FAI): Unless the selected contractor is the original manufacturer or has previously fabricated this exact fixture for the USAF, a First Article Inspection in accordance with AS9102 and a certified CMM dimensional calibration sheet will be required prior to full-scale production. 4. Capability Statement Submission Requirements Interested and capable manufacturing firms are requested to submit a Capability Statement (not exceeding 4 pages) addressing the following: Company Profile: Company Name, Physical Address, CAGE Code, UEI, active Joint Certification Program (JCP) Number (DD Form 2345), and Small Business socio-economic status. Machining Competency: Describe your facility's in-house equipment (e.g., multi-axis CNC mills, wire EDM, surface grinders, and Coordinate Measuring Machines) and your experience holding tolerances of $\pm$ 0.001 inches on tool steel. Past Performance: Provide up to three (3) examples of similar high-tolerance aerospace assembly tooling, drill jigs, or flight-critical fixtures manufactured by your firm within the last 3 years. Lead Time Feasibility: Confirm whether your firm can source raw specialty steels, program tooling paths, fabricate, perform heat treatment, and deliver 5 completed assemblies within 90 calendar days of contract award. If 90 days is not feasible, provide your best realistic lead time. Rough Order of Magnitude (ROM): Provide a non-binding estimated cost range for fabricating 5 units of the drill fixture kit. If possible, please break down estimated machining labor hours versus raw material costs. Submission Email: joshua.akinwande.2@us.af.mil Submission Deadline: November 17, 2026, by 1500 MST Email Subject Line: RFI Response: T-38 CFS 505 Drill Fixtures - [Your Company Name]
FEDERAL BUYER
Buyer and contracting office
Public points of contact
DOCUMENTS & LINKS
Opportunity documents
That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.
GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.
NOTICE TIMELINE
GovBidFit change history
This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.
GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.
GOVBIDFIT SCREENING LENS
What deserves attention before you spend bid time
These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.
This notice appears to be market research rather than a conventional bid invitation. A capability response, technical feedback or evidence of market interest may matter more than a price proposal at this stage.
The stored response date leaves more than ten days, but amendments and pre-response milestones can shorten the usable preparation window.
No Set aside used is recorded as the set-aside or restriction. Confirm the bidding entity actually satisfies the applicable program and size requirements before investing proposal time.
NAICS 333514 · PSC 3455 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.
GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.
The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.
Questions to resolve next
What this opportunity record tells you
SAM.gov identifies this as a sources sought from DEPT OF DEFENSE. The record was posted on November 3, 2026 and currently lists November 17, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.
The listed product or service classification is NAICS 333514 · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · PSC 3455. The set-aside field is No Set aside used. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.
Before deciding to bid
GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.
Open the official SAM.gov notice →