OFFICIAL NOTICE CONTENT
Opportunity description
Delivery and Installation of Wayfinding and Emergency Signage U.S. Embassy Vienna 1. The Contractor shall provide all labor, supervision, design-development coordination, materials, equipment, transport, tools, access equipment, fasteners, and incidentals necessary to produce and install a complete wayfinding and emergency signage system at the U.S. Embassy Vienna compound. The finished work shall include delivery and installation and must follow the Government-furnished sign schedule, location plans, evacuation plans, and the applicable OBO signage design intent for sign types SF02 and SR02. 2. Required Signs and Quantities Category / IDs; Type; Nominal size (W x H); Qty.; Key requirement Exterior: SF02; 450 x 450 mm; 3 units; Six long and six short interchangeable sections per sign. Exterior spare inserts: SF02 - To match exterior signs; 12 units; Blank interchangeable sections. Interior directional: SF02; 400 x 350 mm; 15 units; Six long and six short interchangeable sections per sign. Building directory: SF02; 400 x 1200 mm; 1 unit; Twenty-six long and twenty-six short interchangeable sections. Evacuation plans: SR02; 400 x 350 mm; 10 units; Fixed graphic panels; reproduce the Government-furnished evacuation plan content for each location. Emergency alarm tones: SR02; 230 x 400 mm; 10 units; Fixed graphic panels; two signs on each of Levels 0-4. Interior spare inserts; SF02 - To match interior signs; 24 units; Twelve blank long inserts and twelve short arrow inserts. 3. Technical and Graphic Requirements Use the Government-furnished sign IDs, destinations, floor designations, arrows, building-directory entries, evacuation graphics, legends, emergency symbols, and alarm-tone content. The Contractor shall verify each message and orientation against the location plans before fabrication. SF02 wall-mounted directional signs shall follow the OBO SF02 design intent, including interchangeable message sections, directional symbols, cropped seal where shown, Calibre typography, and translation only where required for areas accessible to the general public. SR02 alert signs shall follow the OBO SR02 design intent: painted acrylic border and face panels, direct-printed text/graphics, concealed mechanical fastening, and the applicable regulatory, warning, or explanatory border treatment. Signs shall be durable, cleanable, non-glare, colorfast, and suitable for the intended interior or exterior location. Exterior assemblies and fixings shall be weather resistant and corrosion resistant. All work and deliverables as per attached Scope of Work and supporting documents.
FEDERAL BUYER
Buyer and contracting office
Public points of contact
DOCUMENTS & LINKS
Opportunity documents
That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.
GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.
NOTICE TIMELINE
GovBidFit change history
This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.
GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.
GOVBIDFIT SCREENING LENS
What deserves attention before you spend bid time
These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.
This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.
The stored response date leaves more than ten days, but amendments and pre-response milestones can shorten the usable preparation window.
The current feed does not show a program-specific set-aside restriction. That does not remove other eligibility, responsibility, registration or solicitation-specific requirements.
NAICS 339950 · PSC 9905 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.
GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.
The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.
Questions to resolve next
What this opportunity record tells you
SAM.gov identifies this as a solicitation from STATE, DEPARTMENT OF. The record was posted on November 2, 2026 and currently lists December 3, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.
The listed product or service classification is NAICS 339950 · Sign Manufacturing · PSC 9905. The set-aside field is Unrestricted. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.
Before deciding to bid
GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.
Open the official SAM.gov notice →