GovBidFit database · SAM.gov sourceData refreshed November 14, 2026Official description stored

Solicitation

JBPHH CAR WASH FABRIC TENSION STRUCTURE

The stored response date has passed

This record lists November 14, 2026 as the response date. Check SAM.gov for an extension, amendment or later notice before preparing a response.

Find current NAICS 236220 opportunities →

Solicitation NAVMWR-26-R-0013 · Due 2026-11-14. JBPHH CAR WASH FABRIC TENSION STRUCTURE. DEPT OF DEFENSE in Hawaii · NAICS 236220.

SolicitationNAVMWR-26-R-0013
Notice typeSolicitation
PostedNovember 13, 2026
Response deadlineNovember 14, 2026
Place of performanceJBPHH, Hawaii, 96860, USA
ClassificationNAICS 236220 · Commercial and Institutional Building Construction · PSC K054
Set-asideUnrestricted

OFFICIAL NOTICE CONTENT

Opportunity description

Stored from SAM.gov public data

The project involves the repair and upgrade of the car wash area, including the installation of fabric tension shade structures over the auto detailing area, existing vending machines, pay stations at both entrances to the car wash, and the water reclamation and oil-water separator systems. The surrounding area around building B75065H will be repaved, with careful attention given to a historic train track located on the site. The repaving will be carried out without obstructing the track, ensuring it remains exposed and at its original elevation. The work will also feature striping, directional arrows, STOP markings, and one-way asphalt painting to enhance traffic flow and safety throughout the area. ONLY DESIGN WILL BE AWARDED UNTIL ENVIRONMENTAL APPROVALS ARE RECIEVED. DESIGN: Shading Structure: a. The design will include three options focused on optimizing traffic flow around the carwash to prevent congestion and enhance accessibility. Additionally, the steel framework and fabric cover will be engineered to meet Hawaii�s storm and wind load requirements, including design wind speeds up to 145 mph and compliance with impact resistance standards for windborne debris. Safety factors for structural stability, drainage, and flood resistance will also be incorporated. Final ratings and requirements will be confirmed during the design phase in coordination with local authorities and engineers to ensure compliance and durability. b. A custom design of the steel framework and fabric cover shall be developed to ensure durability, aesthetic appeal, while also providing the storm rating of the product. The structural design shall be engineered to accommodate the required load, as well as to withstand wind and weather conditions, ensuring long-term performance and stability. c. The contractor shall provide a warranty for the structure and tension fabric, ensuring protection against defects such as corrosion or structural failure. The entire structure, including the fabric membrane, shall be warranted for a minimum service life of 10 years. Covering issues like UV degradation or tearing. The tensioning system, including cables and fittings, shall be covered for 10 years against failure. Regular maintenance, including cleaning and inspections, shall be required to maintain the warranty, and exclusions shall apply for damage caused by extreme weather, misuse, or neglect. Paving & Traffic markings and Signage: a. The Offeror shall provide all design and construction services necessary to mill down three inches of the existing pavement and repave approximately 52,000 sq ft around the car wash building B75065H (J-3 (P0-1)). It is important to note that no digging permit will be issued for this project, so all work must be limited to milling and repaving without any subsurface excavation. b. The Contractor shall ensure the finished service drive allows for positive drainage away from the structures on site. c. The Contractor shall coordinate with the POC and the Local Fire Department for all flame producing / burning activities required by this SOW and shall pay for and procure all required permits prior to construction. d. The Contractor shall provide a warranty on all material and labor for a period of one year (longer if standard for materials/equipment) from the date of acceptance by the POC. The contractor will utilize industry-standard paving equipment, including cold planers for milling, asphalt pavers for laying new pavement, and rollers for compaction, ensuring all equipment meets manufacturer specifications to support the quality and durability of the work under warranty. e. The contractor shall include in the design all necessary drawings that reflect lane striping, directional arrows, STOP markings, and one-way asphalt painting details. This includes clearly marking traffic lanes with the appropriate solid and dashed lines and placing arrows to indicate the correct direction of traffic flow. CONSTRUCTION: Shading Structure: a. The shading structure needs to be installed in the following areas (Attached RFP Section J-3 shading and paving Reference Map) b. Cover the oil-water separator tank. The size of the shading structure is approximately 35x25 ft. Please follow the designated placement as shown in J-3 (S1-Pic 1). c. The vending machine cover area is approximately 10x15 ft. Please refer to picture J-3 (S2-Pic 2) for reference. d. Cover the detailing area, approximately 100ft x 50ft, above the vacuum machines, with a 10ft distance from the main street as the starting reference. J-3 (S3-Pic 3). e. Cover the two pay stations in front of the two entrances to the car wash. The shading structure should be a standalone unit, approximately 12ft x 9ft. Please refer to the reference map J-3 (S4-Pic 4). f. Fabric Overlay and Tensioning: Installing the fabric over the steel frame and securing it. Heavy-duty fabric material (PTFE or PVC-coated polyester) designed for outdoor exposure, UV resistance. The contractor shall ensure that the structure is firmly anchored to a foundation, utilizing materials as required by the site conditions, selecting the appropriate foundation material based on the specific requirements of the project site. 2. Paving: a. The contractor shall mill the existing pavement to a depth of 3 inches below the finished grade to accommodate the installation of a new 3-inch-thick bituminous concrete surface (Hot-Mix Asphalt Surface Course) over the full extent of the service drive. The new surface shall be feathered or smoothly abutted to the existing road. b. The train track is historic. It is imperative that the paving work performed under this contract shall not cover or obstruct the train track. The Contractor shall grind the existing asphalt below the level of the track, ensuring the track is not covered by the paving, thereby maintaining its historical integrity in accordance with applicable preservation standards. c. The Contractor shall ensure all debris from any required pavement milling and/or scarification, be disposed of off-site at an approved facility. 3. Traffic markings and signage: a. The contractor shall include any necessary signage, such as striping, arrows, STOP markings, and one-way asphalt painting details. b. The Contractor shall install liquid thermoplastic paint permanent pavement markings, matching the original configuration and colors for Hickam car Wash, including but not limited to, fire lane delineations and car lanes.

FEDERAL BUYER

Buyer and contracting office

View buyer page →
Department / agencyDEPT OF DEFENSE
Sub-tierDEPT OF THE NAVY
Contracting officeCOMMANDER NAVY INSTALLATIONS CMD
Office addressMILLINGTON, TN, 38055-6500, USA

Public points of contact

PrimaryNika Maldonado, Contracting Officernika.n.maldonado.naf@us.navy.mil9019307728

DOCUMENTS & LINKS

Opportunity documents

Verify on official source
Attachment URLs are not included in the SAM.gov bulk record for this notice.

That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.

View documents on SAM.gov ↗

GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.

NOTICE TIMELINE

GovBidFit change history

1 stored event

This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.

First seen by GovBidFitNovember 14, 2026

GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.

GOVBIDFIT SCREENING LENS

What deserves attention before you spend bid time

Decision support

These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.

Active solicitation stage

This record is in a solicitation stage, so submission instructions, evaluation factors, attachments and amendments should be reviewed before a bid/no-bid decision.

Stored deadline has passed

The response date in the stored record is already past. Check SAM.gov for an amendment, extension, award notice or other update before doing further work.

No socioeconomic restriction recorded

The current feed does not show a program-specific set-aside restriction. That does not remove other eligibility, responsibility, registration or solicitation-specific requirements.

Classification signal

NAICS 236220 · PSC K054 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.

Official description stored

GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.

Public buyer contact available

The source data includes 1 public contracting contact. Use the solicitation's stated communication rules and deadlines before contacting the buyer.

Questions to resolve next

Has SAM.gov posted an amendment or changed the response date, attachments or submission instructions since this GovBidFit snapshot was refreshed?Are there question deadlines, site visits, registrations or internal approvals that occur before the final response date?Can the business perform in Hawaii at a sustainable cost after travel, mobilization, staffing, licensing and subcontractor requirements are considered?

What this opportunity record tells you

SAM.gov identifies this as a solicitation from DEPT OF DEFENSE. The record was posted on November 13, 2026 and currently lists November 14, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.

The listed product or service classification is NAICS 236220 · Commercial and Institutional Building Construction · PSC K054. The set-aside field is Unrestricted. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.

Before deciding to bid

Read the complete official description and scope. Verify the exact response date, time and time zone on SAM.gov. Confirm NAICS/PSC and every set-aside eligibility requirement. Review attachments, amendments, Q&A and submission instructions. Check place of performance, staffing, insurance, bonding and execution requirements.
Source and trust

GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.

Open the official SAM.gov notice →