GovBidFit database · SAM.gov sourceData refreshed November 5, 2026Official description stored

Presolicitation

Electrical and Electronic Properties Measuring and Testing Instruments

Solicitation N6893627Q5001 · Due 2026-11-13. Electrical and Electronic Properties Measuring and Testing…. DEPT OF DEFENSE in California · NAICS 334515.

SolicitationN6893627Q5001
Notice typePresolicitation
PostedOctober 29, 2026
Response deadlineNovember 13, 2026
Place of performanceCalifornia
ClassificationNAICS 334515 · Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals · PSC 6625
Set-asideUnrestricted

OFFICIAL NOTICE CONTENT

Opportunity description

Stored from SAM.gov public data

NOTICE OF INTENT TO SOLE SOURCE REQUIREMENT DESCRIPTION: The Naval Air Warfare Center Weapons Division (NAWCWD) intends to procure a commercial Radio Frequency (RF) record and playback solution. The acquisition consists of: One (1) Rohde & Schwarz (R&S) IQW Wideband I/Q Recorder One (1) R&S SMW200A Vector Signal Generator Associated software, licenses (including the FSW-B517 digital streaming interface upgrade), cables, and support. The required solution must be capable of playing back previously recorded RF signals from a Government-owned library stored in a proprietary R&S In-phase Quadrature (I/Q) format. The system must stream the high-speed I/Q data and convert it back to the analog RF data needed to stimulate the EA-18G aircraft's electronic warfare systems in a laboratory test environment. SOLE-SOURCE RATIONALE: The Government has determined that Rohde & Schwarz is the only source capable of satisfying this requirement. This determination is based on the following: 1. Proprietary Data Compatibility: The EA-18G program's critical test data library, which consists of terabytes of classified threat recordings, exists exclusively in a proprietary Rohde & Schwarz I/Q data format. The Government�s existing I/Q data library is maintained in proprietary R&S format. The required solution must use those files natively or otherwise demonstrate preservation of data integrity, metadata, timing, sample rate, bandwidth, phase coherence, and signal fidelity without introducing unacceptable schedule risk. Market research did not identify an available non-R&S solution that met those conditions. 2. Unacceptable Schedule Risk and Cost: As determined by market research (Sources Sought N6893627Q5001), The alternate OEM solutions evaluated by the technical activity relied on file translation, conversion, or non-native interface approaches that would require validation of converted I/Q data and present unacceptable data-fidelity and schedule risk. WesTest proposed an R&S-supported integration approach intended to avoid or control conversion; however, WesTest subsequently withdrew because it could not assure the required OEM-backed proprietary support. The Government�s existing I/Q data library requires native use of proprietary R&S-format files. Market research did not identify an available source, other than Rohde & Schwarz, that could furnish the complete required configuration including the proprietary equipment, upgrades, licenses, and OEM-backed technical support without data conversion or unacceptable technical and schedule risk. Response Instructions Responses are are due no later than 15 days After posting Submit responses by e-mail to: Primary Point of Contact: Stephanie Amoni, stephanie.j.amoni.civ@us.navy.mil, 564-230-3333 Secondary Point of Contact: Joyce Toye, joyce.n.toye2.civ@us.navy.mil, 858-978-4847 Use the following e-mail subject line: Response to Notice of Intent to Sole Source � N6893627Q5001� I/Q Test Equipment Capability Disclaimer: Information received will be used solely to determine whether to conduct a competitive procurement. The Government will not reimburse respondents for any costs associated with preparation or submission of a response. Interested firms must be registered in the System for Award Management (SAM) database at https://sam.gov/.

FEDERAL BUYER

Buyer and contracting office

View buyer page →
Department / agencyDEPT OF DEFENSE
Sub-tierDEPT OF THE NAVY
Contracting officeNAVAL AIR WARFARE CENTER
Office addressCHINA LAKE, CA, 93555-6018, USA

Public points of contact

DOCUMENTS & LINKS

Opportunity documents

Verify on official source
Attachment URLs are not included in the SAM.gov bulk record for this notice.

That does not mean there are no documents. Open the current SAM.gov notice to see the authoritative attachment and amendment list.

View documents on SAM.gov ↗

GovBidFit does not invent or cache guessed attachment links. The official SAM.gov notice remains the controlling document source.

NOTICE TIMELINE

GovBidFit change history

1 stored event

This timeline records when GovBidFit first stored the notice and material field changes detected during scheduled SAM.gov refreshes. It is an audit aid, not a substitute for the official amendment history.

First seen by GovBidFitOctober 30, 2026

GovBidFit first stored this opportunity from the SAM.gov public bulk feed. This does not replace the official posting date shown above.

GOVBIDFIT SCREENING LENS

What deserves attention before you spend bid time

Decision support

These screening signals are generated from the public notice fields stored for this specific opportunity. They are not eligibility findings or predictions; they are prompts for a faster, more disciplined review of the official solicitation.

Pre-solicitation stage

This is a pre-solicitation signal. Use it to prepare, verify likely eligibility and watch for the formal solicitation or amendments before committing proposal effort.

Near-term deadline

The stored deadline is within ten days. Build an internal submission deadline and verify whether questions, site visits, registrations or approvals are due earlier.

No socioeconomic restriction recorded

The current feed does not show a program-specific set-aside restriction. That does not remove other eligibility, responsibility, registration or solicitation-specific requirements.

Classification signal

NAICS 334515 · PSC 6625 is the recorded classification. Use it as a screening clue, then compare the actual scope and deliverables rather than treating the code alone as proof of fit.

Notice history exists

GovBidFit stores 3 notices tied to this solicitation. Review the notice chain and official SAM.gov history because later postings can change dates, scope or instructions.

Official description stored

GovBidFit stores the source notice text, but its length does not prove the requirements are complete. Review official attachments, clauses, amendments and Q&A before relying on the description.

Public buyer contact available

The source data includes 2 public contracting contacts. Use the solicitation's stated communication rules and deadlines before contacting the buyer.

Questions to resolve next

Has SAM.gov posted an amendment or changed the response date, attachments or submission instructions since this GovBidFit snapshot was refreshed?Has the formal solicitation been posted under this solicitation number or a related notice?Are there question deadlines, site visits, registrations or internal approvals that occur before the final response date?Can the business perform in California at a sustainable cost after travel, mobilization, staffing, licensing and subcontractor requirements are considered?Which related notice or amendment currently controls the response instructions?

What this opportunity record tells you

SAM.gov identifies this as a presolicitation from DEPT OF DEFENSE. The record was posted on October 29, 2026 and currently lists November 13, 2026 as the response deadline. GovBidFit keeps source facts separate from its matching guidance so you can see what comes from the federal notice.

The listed product or service classification is NAICS 334515 · Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals · PSC 6625. The set-aside field is Unrestricted. These fields help narrow your search, but they do not replace the full solicitation, amendments, attachments, clauses or eligibility language on the official source.

Before deciding to bid

Read the complete official description and scope. Verify the exact response date, time and time zone on SAM.gov. Confirm NAICS/PSC and every set-aside eligibility requirement. Review attachments, amendments, Q&A and submission instructions. Check place of performance, staffing, insurance, bonding and execution requirements.
Source and trust

GovBidFit lets you browse federal contract opportunities for free and create free bid alerts. It displays public SAM.gov notice data stored in its database, with a compact snapshot as a fallback. GovBidFit is independent and is not a U.S. government website. Data can lag amendments or later source changes, so always verify the current notice, attachments and deadline on SAM.gov before bidding.

Open the official SAM.gov notice →